[13-June-2022] New 5V0-41.20 Dumps with VCE and PDF from PassLeader (Update Questions)
100% valid 5V0-41.20 exam questions from PassLeader 5V0-41.20 dumps! Welcome to download the newest & 100% pass guarantee PassLeader 5V0-41.20 VCE and PDF dumps: https://www.passleader.com/5v0-41-20.html (40 Q&As)
P.S. Free & New 5V0-41.20 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/drive/folders/1d2kHpJVdm_N_WO165jbrLw430A0bLHsu
NEW QUESTION 1
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications. Refer to the Exhibit(s):
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements. What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)
A. Change the bandwidth measurement under WAN Overlay Advanced Settings.
B. Check underlay network (bandwidth, latency, jitter, packet loss).
C. Under Monitor, check Routing tab.
D. Review Business Policies configuration and match them against the business requirements.
Answer: BD
NEW QUESTION 2
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology. The network administrator determines the issue preventing the Dallas Branch from coming online. Refer to the Exhibit(s):
What must the administrator do for the Edge to communicate with the Orchestrator and other branches?
A. Reverse the WAN Overlay configurations.
B. Update the Orchestrator to the latest version as it enables “Auto WAN Swapping”.
C. Delete the User Defined WAN Overlays as the Orchestrator will discover these automatically on MPLS and Internet.
D. Create a User-defined WAN Overlay to bond both interfaces.
Answer: A
NEW QUESTION 3
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications. Users at multiple branches complain that a highly performant SQL Database cluster residing at the New York Data Center is not responding to database queries or inserts as expected. It is affecting the order management site. A network administrator investigates and finds that traffic from the branches are going through Seattle to reach the SQL Cluster in New York. The design for this SD-WAN network does not call for routing security. The SQL Cluster is reachable through either Data Center, but for performance reasons, must flow through the New York DC. The network administrator has verified that the routes are not present in the OFC and the BGP neighborship is down in Network Services. Refer to the Exhibit(s):
What should the administrator verify?
A. The BGP configuration has a filter in place to deny the prefix in New York.
B. The BGP Authentication matches on both sides.
C. The BGP configuration has a filter in place to deny the prefix in Seattle.
D. Backhauling through the Seattle DC is disabled.
Answer: D
NEW QUESTION 4
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible. Refer to the Exhibit(s):
The tunnel from spoke to hub is not coming up. What are the two possible reasons? (Choose two.)
A. Spoke Edge and hub Edge are two different Edge models.
B. Spoke Edge and hub Edge have a mismatch certificate authentication mode.
C. Hub WAN Interface might be behind the NAT Device or firewall.
D. Dynamic Branch to Branch is not enabled.
Answer: BC
NEW QUESTION 5
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible. Refer to the Exhibit(s):
When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table. What should the network administrator look for next to determine what the issue might be?
A. Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose’s branch router.
B. Check Test & Troubleshoot and review a route table dump of the NY hub site.
C. Check the Global Segment Configuration to see if it has the Routing Flag enabled.
D. Determine if OSPF has been configured on the MPLS Routers at the hub.
Answer: C
NEW QUESTION 6
The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and could connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation. A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology. Refer to the Exhibit(s):
What is the cause of this issue?
A. The activation link did not specify the updated image location requiring the Edge to be re- activated.
B. The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.
C. The Edge will be offline for about 4 hours until it has completed the factory image installation.
D. The activation link contained incorrect configurations for WAN overlays and WAN interfaces.
Answer: A
NEW QUESTION 7
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications. Refer to the Exhibit(s):
Users at the Dallas Branch are complaining that downloads/uploads from Office365 are slow. Working in Teams has been providing slow responses. The Internet circuit is 100Mbps while the MPLS Circuit is 45Mbps. Upon troubleshooting, the network administrator has noticed the traffic is Backhauling through the Seattle hub for all internet traffic. How should the network administrator resolve the issue?
A. Leave the system as is, the gateways will resolve the issues after doing 15 minutes of link qualification.
B. Advertise public routes to Office365 and Teams through the New York Hub.
C. Leave the system as is, the hubs will auto-rebalance tunnels after doing 15 minutes of link qualification.
D. Prevent the hub from advertising a default route.
Answer: B
NEW QUESTION 8
A network administrator is tasked! with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites- One is an Internet-only site and two are Hybrid locations with both internet and MPLS: The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology. Refer to the Exhibit(s):
An administrator is attempting to activate two Edge devices at the Chicago branch location. The local technician reports that the Edge devices are not coming online. The Edge devices have been plugged in, powered on, and connected to the correct circuits with an Enhanced HA setup. What should the local technician check first when troubleshooting the issue?
A. Verify beep sequence of the Edge devices.
B. Review color of the LED.
C. Review the Orchestrator for HA misconfiguration issues.
D. Verify the link light sequence of the HA ports.
Answer: B
NEW QUESTION 9
A network administrator is tasked with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology. After the network administrator has determined the problem with the Edge not being able to access the Internet, the administrator receives another error stating that the SD-WAN Orchestrator is still not reachable. The VCO’s address is Amer-vcoOl.velocloud.net. Refer to the Exhibit(s):
What might be disallowing the Edge to communicate with the Orchestrator?
A. The SD-WAN Orchestrator specified is incorrect, and a new activation email needs to be sent.
B. The local firewall that the Edge uses to reach externally is blocking UDP Port 53 in both directions.
C. The SD-WAN Orchestrator has a limited 60-second window for the Edge to come online.
D. The SD-WAN Orchestrator is not being resolved for DNS.
Answer: C
NEW QUESTION 10
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible. Refer to the Exhibit(s):
The SD-WAN Edge at this location has been activated. It is incapable of establishing any overlay tunnels. Due to this being an internet only branch, no underlay connectivity is present to the hubs. The SD-WAN Edge is connected behind a firewall and the security team states that all necessary ports are open. How can this issue be resolved?
A. The security team needs to open TCP port 4500 instead of TCP port 2426.
B. The security team need to open TCP port 2426 outbound but not inbound.
C. The security team needs to open TCP port 22 instead of TCP port 2426.
D. The security team needs to open UDP port 2426 outbound and inbound.
Answer: D
NEW QUESTION 11
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible. Refer to the Exhibit(s):
Several reports have come in from branch locations indicating customers cannot reach applications being served by the hub location. The hub location has a single LAN-side port from which it should be learning dynamic routes for the subnets serving the applications. How should the technician verify if the ports on the Edge are up and working?
A. Look under Administration and System Settings to verify if the interfaces are configured and enabled.
B. Look in Test & Troubleshoot under the Remote Diagnostics and run Interface status.
C. Look in Test & Troubleshoot under the Remote Actions and run System Health.
D. Look in Test & Troubleshoot under the Remote Diagnostics and run System Health.
Answer: B
NEW QUESTION 12
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible. Refer to the Exhibit(s):
One branch location is not able to communicate with another branch location via dynamic branch-to-branch tunnels. While troubleshooting at the Edge configuration level, the network administrator notices Cloud VPN is not enabled and is grayed out, preventing them from enabling that feature. Where is the next location to check for and enable the necessary feature?
A. Within the Configuration section under Profiles.
B. Within the Monitor section under Network Services.
C. Within the Test & Troubleshooting section under Remote Diagnostics.
D. Within the Configuration section under Customer VPN enablement.
Answer: D
NEW QUESTION 13
……
100% valid 5V0-41.20 exam questions from PassLeader 5V0-41.20 dumps! Welcome to download the newest & 100% pass guarantee PassLeader 5V0-41.20 VCE and PDF dumps: https://www.passleader.com/5v0-41-20.html (40 Q&As)
P.S. Free & New 5V0-41.20 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/drive/folders/1d2kHpJVdm_N_WO165jbrLw430A0bLHsu